- Phone : 02756-230200
- Email: info@shreeumaindustries.com
SPRINKLER PIPE
Sprinkler Pipe
SHREE UMA INDUSTRIES designs and manufactures sprinkler pipes using HDPE virgin raw material and are produced as per IS 14151 - 2008 (PART II) of the bureau of Indian Standards..
Our Sprinkler pipes are available from size 63mm to 110mm (OD) outer diameter and pressure rating from class I to IV, PN 2.5, PN 3.2, PN 4, PN 6 kg pressure (Part II) with complete range of fittings. HDPE grades PE-63 & above are used to manufacture sprinkler pipes.
HDPE Sprinkler Irrigation System provide low maintenance cost, Increased Productivity & 50% water saving in comparison with conventional irrigation.
UMA Sprinkler PipesM are used in MICRO Irrigation/ Agriculture, Water Supply, Tube Wells, Sewerage and Drainage.
Sprinkler pipe dimension chart (As Per IS 14151)
| Nominal Diameter | Outside Diameter | Nominal Tolerance on Outside | Ovality | Wall thickness | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Class-1 (2.5 kg/cm2) | Class-2 (3.2 kg/cm2) | Class-3 (4 kg/cm2) | Class-4 (6 kg/cm2) | ||||||||
| Min | Max | Min | Max | Min | Max | Min | Max | ||||
| 63 | 63.0 | +0.6 | 1.5 | - | - | 2.0 | 2.4 | 2.5 | 2.9 | 3.8 | 4.4 |
| 75 | 75.0 | +0.7 | 1.6 | 2.0 | 2.4 | 2.5 | 2.9 | 3.0 | 3.4 | 4.5 | 5.2 |
| 90 | 90.0 | +0.8 | 1.8 | 2.2 | 2.6 | 2.9 | 3.4 | 3.5 | 4.1 | 5.3 | 6.1 |
| 110 | 110.0 | +1.0 | 2.2 | 2.7 | 3.2 | 3.4 | 3.9 | 4.2 | 4.8 | 6.5 | 7.4 |